The Enviro-Monitron® enables to modulate the development of key parameters such as water temperature, flow rate, dissolved oxygen, salinity, pH and more. The monitron can also control a photoperiod module.
Each unit is able to transfer the data to a dedicated hub by means of a wireless or cable connection. Also, several Enviro-Monitrons can be seamlessly integrated in the Monitron network.
CCAC Guideline 31''An environmental monitoring system is essential for aquatic facilities and should be designed to suit the water management system.'' Section 3.1 Management of water quality, p. 32 |
Water management made easy!
- Every unit is built to your specifications, so any needs will be met;
- Adjust the level of make-up water in your system. This feature, exclusive to aquabioLab, is useful to prevent the accumulation of metabolites in water. It offers full control over the time needed to completely replace the water of a system by setting the desired percentage of water reuse over a 24 h period;
Peace of mind with aquabioLab's water make up system, how do we do it?
- By setting the percentage of water reuse to 90%, for instance, a peristaltic pump will operate on a 24 h basis to replace 10% of the total water volume;
- With this unique feature, you can adjust the water inlet in each of your systems to the optimal rate for different applications. This means great water savings and also assures environmental
uniformity among all units;
Low maintenance and ease of use
- Monitors and controls water temperature, dissolved oxygen level, salinity, pH. The Monitron will also monitors the total flow rate to the rearing tanks through a rotometer. This feature adds great flexibility in adjusting the water flow through the fish basins;
- Since the Monitron Network is not involved in building maintenance, you can retain full and personal control over all the information displayed, while being sure that no one else will interfere;
- The system is extremely simple to use. You do not need to hire a technician to configure or program the controls. Every modification is done directly on the Monitron _ or, when linked to the Monitron Network, from the dedicated central computer, or your own computer;
Security
- Used in conjunction with our Central computer running the Enviro-Monitron’s network software, it provides an elaborate Email alarm notification directly on a digital pager;
- The alarm system provides visual notification when data exceeds one or multiple programmed acceptable deviations that where set in percentage;
- If the flow rate drops by more than 50% below the set flow rate, the heater or chiller automatically stops and an alarm is generated, informing you that it is time to clean the cartridges.
Trouble shooting done at distance
- The Central computer is equiped with 'LOGMEIN' remote access. This allows our electronic technicians to troubleshoot the system from our location in Quebec, Canada;
- This remote access also allows you to receive training and configuration assistance directly on your screen;